Casting welding machine, also known as automatic battery casting welding machine. It is a small valve-controlled sealed lead-acid battery casting and welding equipment. The whole set of equipment includes a fixture, a mold, a furnace, a cooling device, and a mold release into the pool shell device. The fixture is composed of a fixed plate and a slidable pressing plate on the bottom plate, and the fixed plate is provided with a positioning pin; the surface of the casting and welding mold is provided with a busbar and a pole-shaped groove, and a positioning hole; demoulding The device for entering the pool shell includes a pneumatic demoulding device and a pneumatic device for entering the pool shell. The casting and welding equipment of the utility model solves the disadvantages of low production efficiency and poor welding quality of manual welding in battery production, and greatly reduces the contact between people and lead. This equipment is simple and practical to operate, suitable for the assembly and production of small and medium-sized VRLA battery factories.
technical parameter:
1. Machine model: GD-1109-80, -120
2. Applicable voltage: AC±5%/50HZ
3. Maximum power: 16KW
4. Applicable power: air compressor
5. Air source pressure: 0.8Mpa6, scope of application: various small dense lead-acid batteries
7. Dimensions: 1200×1400×2200mm
